This pitcher is one with an infusing sleeve, an ice cube insert, and a E-book recipe book. This pitcher is made from Acrylic. The pitcher has a 3 quart capacity.
This is a see thru pitcher made from Acrylic which makes it difficult to break. Now for the inserts come along with this pitcher. The infusion sleeve is made from the same material as the pitcher. The ice insert is made from a softer plastic so it can expand when the water freezes.
The infusion sleeve screws into the inside of the lid of the pitcher. It does attach firmly once it is screwed into place. You wont have to worry about it dropping off and landing in the pitcher to be fished out. This sleeve is very simple to use. Place what you would like to add to your drink you are making. I tend to use a lot of mango with my infusion sleeve. I start off with putting 2 tea bags inside the tube and attach it to the lid. From there I let it cold brew over night. Then once my tea has finished brewing I pull the infusion sleeve out and throw out my tea bags. I then slice my mango's and put them in the infusion sleeve. Then I let that set for a few hours. From there I have a really nice mango flavored tea.
Then we have the Ice sleeve. There is a marker line to fill with water before filling. I do not recommend over filling this tube because it could damage it. Now This is where the ice sleeve comes in for my tea. As I set the table for diner I screw the ice sleeve into the lid in the same place the infusion sleeve screws in. Now I place it into pitcher of tea and it chills nicely in time for diner.
If you are looking for a pitcher with a very nice extra pieces to make the infusion process very easy to do. This pitcher can be used to make a multitude of combinations to enhance the drinks inside the pitcher. I would like to thank Gear Ultimate and affiliates for sending me this pitcher to try out and share my opinion.
Can be found at:
http://www.amazon.com/Infused-Water-Pitcher-Shatterproof-Homemade/dp/B013NO1M24?ie=UTF8&keywords=water+pitcher
Hash Tag Users: #GearUltimate
Disclosure of Material Connection: I received a sample for free in the hope that I would mention it on my blog. Regardless, I only recommend products or services I tried personally and believe will be good for my readers. No other form of compensation was received. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising."
